This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 3 title
This is default featured slide 4 title
This is default featured slide 5 title
 

Category Archives: Home Improvement

Sub Floor Ventilation

A sub floor refers to an extra level of flooring that is positioned right on top of the floor joists, and another level of flooring is then placed over it which is the visible floor. A sub floor is usually added to a building so that the floor remains even and flat and also to increase its stability. When air between the floors absorbs moisture from the soil, the humidity of the air goes up which causes the flooring and the framing of the building to also absorb moisture.

Ventilation is therefore important in order to decrease the humidity of the air that is found between the floors. This can be done by replacing the dump air found between the floors with dry air from outside.

Need For Ventilation

Once you realize that your floor has mould and that there is a stale smell in the rooms of your home, then you may be in need of immediate sub floor ventilation. Dampness of the soil usually increases during wet weather, and the moisture easily gets absorbed into the floor and walls of your home. This dampness causes moulds that attract termites which end up destroying your floor.

Moulds can also discolor the tiles of your floor and the bricks that make up your home. Sub floor ventilation is therefore important to in reducing the maintenance costs of your home and also in retaining its value.

Types Of Ventilation

There are different methods that can be used for sub floor ventilation, and how much ventilation will be required will depend on the amount of humidity in that location. The use of air vents is widely used in ventilating the sub floor. This is where air vents are located on opposite sides of the sub floor and air can therefore get in through one side and out through the other.

There should be nothing blocking the movement of the air in and out of the sub floor. To make this system more effective, sub floor fans can be installed to ensure there is proper movement of air. The fans create negative pressure thus causing air to rush in from the vents.

Wind Up Your Bedroom Efficiently

• Organize your room: Having an organized room to start off with would prove to be beneficial as you would be able to get ample amount of space. It would also help you pack only the important things which would be dust free.

• Have a checklist at hand: Although making a list of your belongings would seem to be a very immature idea at first, you can trust anyone on this that would seem to be a boom when you start packing up. This is because you would have all things clear as to which ones are important and your top priority. This list would also give you an idea about the amount of packing material you would require.

• Pack mattress and carpets efficiently: Most of the people invest a huge amount of money in buying a mattress as it is a matter of their comfort. Thus, make sure you pack them well so as to avoid them from getting dirty during the transit. Pack them securely in shrink wraps which are specifically meant to protect carpets and mattresses. Don’t worry if you do not have one. The packers and movers would surely be able to help you on this.

• Make use of garbage bags to pack linen covers and pillows: Since garbage bags are large and sturdy they would be the best packing material for your linen covers and pillows. Be sure to seal the bags before transporting them.

Hiring A Ventilation Expert

When you contact a ventilation expert, he will check your under floor and confirm that the cause of your damp under floor is poor aeration. There are many factors that contribute to poor aeration of your under floor. It could be that you are living in a home that was built many years ago and the ground has shifted over the years. This will cause the placement of the vents to be altered which then affects ventilation.

Your under floor could also have been built with insufficient vents or vents that are too small. You may also have carried out some landscaping which ended up blocking the vents that are meant for ventilation.

Finding A Solution

The ventilation expert will need to come up with the sub floor ventilation requirements of your under floor. He can do this by calculating the air flow which will enable him to know how much ventilation will be needed and the type of ventilation that will be effective. You can either use natural or mechanical ventilation to air your under floor. The type of house you have, the type of soil that it is built on and the weather conditions experienced in your locality will be considered when deciding on the type of ventilation.

The expert has to ensure that the vents are placed correctly so that fresh air comes in from one direction only and the stale air is extracted from the opposite side. In order for the ventilation to be effective, it may have to be regulated at one point or another. Mechanical ventilation can be used so that the fans are switched off when the air outside is humid so that this air is not introduced into the under floor.

Sub Floor Design

If you are planning to build your home, you should make sure that the sub floor ventilation requirements are addressed. This will ensure that your home is built on the right foundation and you do not have to deal with a damp under floor later on.

The sub floor is a very important part of your home as it holds your floor and the entire home. A sub floor that is properly designed will protect your home from movements in the soil. Soil can expand and contract in response to the amount of moisture and it can also move due to the weight of your home. The right ventilation will ensure that the structure of your home remains intact.

Convert Your Living Room

Kept spotlessly clean, the living room location permitted the homemaker to entertain guests without their getting far into the dwelling (where messes lurked). A home maker might comfortably engage in polite and interesting conversation, and make an impression on guests in the living room. That location, the most formal, coat-and-tie room in the house, exuded sophistication as well as cleanliness and it wordlessly identified the family as rising in social status (or it did not). But, housing changed in the U.S. in the 1970’s when people wanted to express themselves, to have more choice, and they cared less about what guests thought of them.

They cared more about configuring their home with imaginative and useful living space. Still, even today, most newly constructed homes, as well as the ones built before the 1970s, have living rooms. Yet, the family room (where the radio once rested, then the television set sat, and now the wide-screen TV mounts upon a wall) practically centers both the family and their guests. Entertainment in the digital age, not simple conversation, requires access to digital content (no coat-and-tie necessary or wanted).

Homeowners began to remodel their living rooms into home offices, a special room ensconced with a desk, a computer work station, and online access. Then, the computer work station evolved to become the source of computer games and many former living rooms and offices became online gaming rooms. Now, neither computing nor gaming require sequestering in a room. A tablet or a laptop enables mobile computing and a smart phone enables online gaming.

Love Glass Stairs

Light

The hallway is often the darkest part of the house, which isn’t ideal for making a good first impression on visitors. A traditional staircase balustrade, consisting of a handrail and base rail connected by wooden or metal spindles (also called balusters), will contribute to the gloom by blocking precious natural light. Using glass panels as the banister infill will instantly brighten the room by encouraging light to flow more freely.

Space

It’s amazing the way glass can make a room feel so much bigger. A transparent balustrade offers little or no barrier to the eye, increasing the sense of space. This is particularly useful for staircases situated in a living or dining room, as clear panels make the structure seem less obtrusive.

Style

Glass is much favoured by interior designers at the moment, and will suit almost any age of property. It can improve the look and feel of a modern house, boosting its contemporary credentials and bringing it bang up to date. At the other end of the age scale, glass can offer an interesting twist to a period home. A dark cottage with beamed ceilings and small windows, for example, can be brightened up and made more appealing by replacing solid wooden balusters with light-enhancing glass panels.

Use the Space Under Your Stairs

Office

As the modern trend for open plan living grows ever more popular, many people have removed the cupboard under the stairs and replaced it with an office or study area.

The neatest way of doing this is to have custom-made shelves and a desk unit fitted. However, if your budget is modest, or you don’t want to commit to a permanent office, you can simply install a free-standing desk and some shelving units.

Bathroom

Fitting an additional toilet or shower will ease pressure on the family bathroom and is particularly useful if you have small children or elderly relatives living with you. If done well, it should also increase the resale value of your property.

Headroom can be problem, so take accurate measurements to ensure people will have enough room to stand upright. You may also want to consider installing a special sanitary pump if the pipes cannot be connected directly to the main waste system.

Shelving space

The great thing about shelves is their versatility – you can find ones to fit into almost type of space. Fitting a tailor-made shelving unit under the stairs will allow you to make the most of the space. You will be able to display all your best photos, ornaments, CDs and books that might otherwise be boxed away – and to show off your favourite items, you could even fit some strategically placed backlights.

Prepare Home For Winter

Clear Your Eaves
This is not a complicated task, but it’s an important job nonetheless. Clogged eavestroughs can lead to the formation of ice dams, which can tear off gutters, loosen shingles and leave your roof vulnerable to leaks. Simply climb to the edge of your roof and carefully dig out the debris. It’s not necessary to remove every small stone. The main purpose is to make sure nothing restricts the flow of water, and that no stagnant water remains in the gutters.

Prevent Ice Dams
If your home had lots of icicles last winter, or worse, ice dams, which can cause meltwater to back up and flow into your house, take steps to prevent potential damage this year. Get the assistance of a home-energy auditor or weatherization contractor. Have them fix the air leaks or inadequate insulation in your attic.

Check Your Roof
If you can’t get access to your roof, or prefer not to go on the roof, use binoculars to inspect the shingles. Look for damaged, loose or missing shingles that may leak during winter’s storms or from melting snow.

Caulk Windows and Doors
If the gaps between siding and window or door frames are bigger than the width of a nickel, you need to reapply exterior caulk. (Check the joints in window and door frames, too.) Silicone caulk is best for exterior use because it won’t shrink and it’s impervious to the elements.

Shut Off Exterior Faucets
Cold winter temperatures can cause your pipes to freeze and burst inside your home, which can result in major water damage. Locate and close any shut-off valves that lead to outside faucets, and drain any excess water inside the lines. It’s also a good idea to also drain any interior pipes in unheated areas of your home, such as your attic.

Stow Your Mower
As the mower sits through the winter, fuel remaining in its engine will decompose, “varnishing” the carburetor and causing difficulty when you try to start the engine in the spring. wait until the tank is nearly empty from use and run the engine (outdoors) to use up the remaining fuel.

Call a Chimney Sweep
Before you burn the Yule log, make sure your fireplace (or any heating appliance burning gas, oil, wood or coal), chimney and vents are clean and in good repair. That will prevent chimney fires and prevent carbon monoxide from creeping into your home. If you have a wood-burning heating appliance or fireplace, have your chimney inspected and cleaned by a certified chimney inspector to reduce your risk of a fire.

Repair for All Types of Water Damage

Types of Damage Based on Category

Clean water damage occurs when the water is clear and does not contain contaminants. In this case, the water usually comes from a burst pipe. Even though the health hazard for people is practically non-existent, you must act immediately to dry the flooded area or mold can grow quickly.

Grey water is an indicator of slight contamination with microbes. It may come from the washing machine or from the toilet bowl. Cleaning should begin immediately provided that cleaners wear protective gloves, masks and goggles.

Black water is heavily contaminated by all kinds of dangerous microorganisms and possibly chemicals such as fertilizers and pesticides. Black water flooding usually occurs in case of a natural disaster or serious damage to the sewage system. This type of water damage must be handled by professionals only as it is extremely hazardous.

Levels of Water Damage

Class 1 destruction is when there is a small amount of moisture within a restricted area. Usually, only porous materials such as plywood are affected. As long as the area is dried quickly, only minor water damage repair will be necessary.

Class 2 destruction is present when the water has affected the entire room and has reached a level of twelve inches or higher. It has penetrated various structural materials, but not too deeply. In this case, the repair can involve removing wet sections of damaged materials like drywall and filling the holes with special sealant. This method has the best chances of working when the drying is quick.

Class 3 water destruction is when the walls, ceilings and floors along with the carpet and insulation are saturated with water. Professional inspection is necessary to determine if the house can be salvaged, which is most often the case, what kind of repair is needed and how much it will cost. The solution typically involves replacing the flooring, the wall and ceiling drywall panels and the insulation.

Class 4 destruction is when the water has saturated even non-porous materials such as stone. The most serious type of water damage typically occurs when the house has not been dried quickly. It is worth noting that sometimes the delay is due to technical reasons such as uncertainty whether the structure is safe enough for the restoration crew to get in. Again, expert inspection is required for determining if and how the house can be saved. If the foundation is mostly still intact, for example, repair may be an effective solution.

Benefits Of Weathering Steels

Exposure to the elements

Traditional steel loses its strength when exposed to corrosion, but Corten gets stronger when it is exposed to the weather. The sheets form a layer of beneficial layer when they come into contact with oxygen and moisture. So, this is one of the major benefits of Corten.

The strength of the weathering steel is also very high. Plus, they require less maintenance and save you a lot of money. All of these benefits make this type of steel an ideal choice for the construction of roofs, bridges and buildings with open frames. As a matter fact, history tells us that bridges constructed with the weathering steel stand the test of time for as many as 120 years without requiring a lot of maintenance. So, these bridges don’t need to be regularly checked or inspected.

The look of the Corten is another thing that makes it so popular. Buildings constructed with this steel look reddish, just like rust. As the exposure to the elements continues, the steel starts to have a russet patina, and most people find it very beautiful. So, the rust looks beautiful and doesn’t look ugly in any way.

The Takeaway

To cut a long story short, Corten steel is popular among a large community of engineers and architects. And the reason is that it offers a lot of advantages over the traditional steel. This steel is arguably the strongest steel that is able to stand the test of time and doesn’t require a lot of regular upkeep. Moreover, buildings built with the Corten don’t need to be painted, which is a great thing for the environment as well. And the biggest of the benefits is that you save a lot of bucks, as you don’t need to pay to the professional to inspect the buildings on a regular basis.

Having Aluminium Curtain Walling

Lighting and elegance

The combination of aluminium frames and glass material together makes it a very classy option to use, also allows the abundance of daylight to walk in, thus leading to less use of power consumption during the daytime.

No UV rays

UV – the ultraviolet rays are very harmful to any skin, as they can cause severe disease in long run. It is necessary to opt for a material that is very friendly in terms of harmful rays. The design of the wall confirms the 99% reduction of harmful and toxic UV rays to the human bodies.

Wind resistant

The structure of the wall is very efficient in keeping away the wind and forces that are acting against the building.

Fire extinguisher

The design of the wall is very helpful in preventing the fire from spreading floor to floor.

Disadvantages of curtain walls

Great Cost and time

These walls are very ineffective in terms of cost and time management. The Huge cost is involved while shipping the material and storing them. The time taken to complete the structure is very long too.

Replacement of sealant

To keep the wind and moisture at vicinity, a sealant is applied to the perimeter of the structure. The sealant needs to be replaced after every 10 years or so.

Peculiar Cleaning

These walls require huge cleaning and maintenance on an everyday basis. As aluminium frames are generally painted or are anodized. It is necessary to make sure that the cleaning near the anodized parts is done very carefully, as cleaning supplies or detergent can clear off the coating from such frames or material.